If you need to change brake pads on your Lexus GS 350, here is how to do it: Park the car in a level place and turn off the ignition Locate the four screws that hold down the caliper cover Remove these screws and then slide out the caliper cover. You will now see two … Read more
ABS lights can indicate a problem with your brake pads, which in turn could result in decreased braking power and increased wear on your vehicle’s rotors. It is important to have your brakes inspected regularly by a mechanic to ensure that there are no issues with the pads or rotor assembly. If you do see … Read more
If you’re experiencing loud rotor noise when driving your car, there’s a good chance that it’s due to worn or damaged rotors. This can cause the hubs and brakes on your car to squeal or make other noises. If you are hearing a loud noise coming from your new rotors, it’s most likely due to … Read more
If you have a rotor that needs to be replaced, the screws may need to be removed first. Use a drill bit with a slightly smaller diameter than the screw and carefully drill through the plastic cover around the screw. Then use an adjustable wrench or pliers to remove the screw from its housing. After … Read more
If your brake pads are worn down and need to be replaced, it is important to do the job correctly or you could end up with a lot of problems. There are different steps that must be followed in order to replace the pads on a Ford F250 truck. Make sure that you have all … Read more
Rotor runout is a common issue with electric motors and can lead to decreased performance and even potential failure of the motor. There are several ways to check rotor runout, but one of the simplest methods is to use a dial indicator. This device uses an adjustable pointer to measure how much play or slop … Read more